MOD-M10GTP
10GBASE-T Copper SFP Module
MOD-M10GTP Copper SFP Transceiver provides standard serial ID information compliant with SFP MSA, which can be accessed with address of 0xA0 via the 2-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2-wire serial bus at address 0xAC for a write and 0xAD for a read. Detail protocol refers to “I2C to MDIO Bridge” section. Applications
MOD-M10GTP Copper SFP transceiver acts as physical layer interface function for 10GBASE-T, 1000BASE-T and 100BASE-T Ethernet with Cat 6a or Cat 7 twisted-pair cable. It connects to a switch controller through XFI/10BASE-KR for 10G and SGMII for 100/1000BASE-T. The Copper SFP transceiver is designed fully compliant with IEEE 802.3 standard. It connects to network through isolated transformer. It can be programmed to fix operating speed or auto-negotiation with advertised capabilities.
MOD-M10GTP Copper SFP transceiver features simple application in data center network at 10Gb/s, and allows link up exceed 30 meters. It really enables a new dimension of flexibility for Network Equipment designer, and for data center facility planner to optimize capital expense.
-
RP-M10GTP 10GBASE-T Copper SFP Module