RP-PE48004


RP- PE48004
10/100M PoE Injector

Datasheet
Firmware

  • RP-PE48004, Single-port PoE Injector, takes 90~264Vac and delivers 48Vdc 400mA with base Unit for POE. It powers 48Vdc via pairs 4,5& 7,8 of the UTP cable and for power supply safety, it also supports over power protection maximum 96V for 48V output.

    • Complies with IEEE 802.3/802.3u 10/100Base-T
    • Provides 48Vdc via pairs 4,5(+)& 7,8(-) of RJ-45 cable and for power supply safety
    • Distance up to 100 meters
    • Provides up to 15.4W of Power over Ethernet

  • Input Requirements
    • AC VOLTAGE: 90Vac TO 264Vac INPUT
    • FREQUENCY: 47Hz TO 63Hz
    • AC CURRENT: 0.6A MAX.
    • INRUSH CURRENT: 40A MAX. AT 115Vac AND FULL LOAD, COLD START, 25°C.
    Output Requirements
    • DC OUT REQUIREMENTS:
    OUTPUT VOLTAGE OUTPUT TOLERANCE RIPPLE & NOISE LOAD
    MIN MAX
    +48Vdc 45.6V~50.4V 480mVp-p 0.0A 0.4A
    • OVERSHOOT: OVERSHOOT SHOULD NOT EXCEED 10% OVER NOMINAL VOLTAGE
    • RISE TIME: 50mS MAX.
    • HOLD-UP TIME: MINIMUM 10mS AT 80% MAX LOAD, 115Vac INPUT
    Efficiency
    • THE SWITCHER SHOULD PROVIDE DC CONVERSION EFFICIENCY MINIMUM 80%   AT FULL LOAD, 115Vac INPUT.
    Protection Requirements
    • OVER VOLTAGE PROTECTION: 96V MAX. FOR 48V OUTPUT
    Environment
    • Operating temperature : 0°C to 40°C
    • Operating Humidity:20% to 90% (Non-Condensing)

  • RP-PE48004 10/100M 48V/0.4A PoE Injector

Related Products