4-P Gigabit + 2-SFP(100/1G) slot Industrial Switch W/ 4-Port PoE+

  • RP-IPG402 Industrial Ethernet Switch with POE+ feature complies with IEEE802.3af and IEEE802.3at. It delivers 30watts power per POE port and generates a total of 120 watts power to PD devices, and 2 SFP slots are supported.

    RP-IPG402 provides power input voltage 48~56Vdc, especially for IP surveillance, traffic monitoring and for a broad range of applications. It can be used as a stand-alone device for buses, trucks, and other vehicles for Surveillance purposes.

    With IP-30 standard industrial case protection allows for either DIN rail or wall mounting for efficient use of cabinet space. Its wide operating temperature ranges from -40°C to 75°C for under harsh environment.

    • Supports P.S.E. based on IEEE 802.3at up to 30 Watts per port
    • SFP port supports 100Base-FX and 1000Base-X speed
    • Support 48~56VDC power inputs for power redundancy
    • Supports auto-negotiation and auto-MDI/MDI-X
    • Supports store and forward transmission
    • Supports flow control
    • Rigid IP-30 housing design
    • DIN-Rail and wall mounting enabled

  • Standards
    • IEEE 802.3 10Base-T Ethernet
    • IEEE 802.3u 100Base-TX Fast Ethernet
    • IEEE 802.3ab 1000Base-T Gigabit Ethernet
    • IEEE 802.3z 1000Base-X Gigabit Ethernet
    • IEEE802.3x Flow Control and Back Pressure,
    • IEEE802.3af for POE
    • IEEE802.3at for POE+
    Switch Architecture
    • Back-plane (Switching Fabric): 12Gbps
    Data Processing
    • Store and Forward
    Flow Control
    • IEEE 802.3x Flow Control and Back Pressure
    Jumbo Frame
    • 10KB
    MAC Table Size
    • 1K
    Packet Buffer Size
    • 1Mbits
    Network Connector
    • 4 RJ-45 Port: 10/100/1000BaseT(X) auto negotiation, 4 Giga POE+ 802.3at/af PSE port, Auto MDI/MDI-X function, Full/Half duplex
    • 2 SFP slots: 100/1000M Base-X
    Network Cable
    • UTP/STP above Cat.5e Cable, EIA/TIA-568 100-ohm (100m)
    • Fiber Cable (Multi-mode):50/125um,62.5/125um
    • Fiber Cable (Single-mode): 9/125um
    • CSMA/CD
    • PW1(Power 1) Green, PW2(Power 2) Green, ERR( Fault ) Amber
    • TX/RJ-45 port: LNK (Link/Active) Green, SPD(Speed) 10/100(OFF ) ,1000 (Green)
    • SFP Fiber Per port: Link (Green) , Active Flash
    DIP Switch
    • DIP 1: OFF: Port 5 SFP ON (DEFAULT) ; ON: Port 5 SFP OFF
    • DIP 2: OFF: SFP 1000M (DEFAULT) ; ON: SFP 100M
    Reverse polarity protection
    • Present
    Overload current protection
    • Present
    Power Supply
    • Redundant DC 48~56V Power Input
    Power Consumption
    • 5.76W@48 VDC full load, Without PoE
    Alarm Relay Contact
    • Relay outputs with current carrying capacity of 1A @24VDC Relay in short circuit mode when 2 powers are connected. in open circuit mode when only one power supply is connected
    PoE power budget
    • Per port 30W, Max.36W per port at 48VDC input
    • Max. 126W @ 48VDC power input
    Removable Terminal Block
    • Provide 2 Redundant power ,Alarm relay contact ,6 Pin
    PoE efficiency
    • 48VDC
    Surface temperature
    • Surface temperature rises 6°C full load in a 75°C chamber
    Operating Temperature
    • -40°C ~75°C
    Storage Temperature
    • -40°C~85°C
    Operating Humidity
    • 5% to 95% (Non-condensing)
    • Rugged Metal ,IP30 Protection
    • 142 x 43 x 105mm (LxWxD)
    Installation mounting
    • DIN Rail mounting and Wall Mounting
    • CE, FCC
    • FCC Part 15 Subpart B Class A
    • CE EN 55022 Class A

  • RP-IPG402   4-P Gigabit + 2-SFP(100/1G) slot Industrial Switch W/ 4-Port PoE+

Related Products