Wireless-N 4-P High-Power AP Router, 2T2R

  • The Router is suitable for Small Office/Home Office (SOHO) Wireless network solution. It is a 4 in 1 network device, which combines wireless access point, firewall, 4-port Switch and the NAT-Router. It provides up to 300Mbps data transmission rate in 2.4GHz frequency, complies with IEEE802.11n, IEEE802.11g and IEEE802.11b. The router supports wireless LAN for up to 128-bit WEP, WPA/WPA2 encryption security. The device provides WEB and Remote Management and system log so that network administrators can manage and monitor the network in real time.

    The Router provides a hardware WPS (Wi-Fi protected setup) button, which helps you setup a secured wireless network in a minute and activate the wireless protection easily.

    • 2.4GHz IEEE 802.11n 2x2 MIMO
    • Complies with IEEE 802.11bg
    • Data-rate up to 300Mbps
    • High power and High sensitivity
    • Wide coverage
    • RF output power adjustable
    • Firewall, URL/IP/Port/MAC filtering
    • Firmware upgrade via HTTP
    • Support Gateway, Bridge and WISP mode
    • Multiple ESSID
    • QoS enhancement-WMM
    • TCP/UDP/ICMP/ARP protocol stack
    • Virtual DMZ, Port forwarding
    • Easy setup wizard
    • Web-based utility
    • Passive PoE
    • Telnet supported
    • Country code selectable
    • WAN Remote Port configuration
    • Support 12V Passive PoE onboard

  • Standards
    • IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
    • IEEE 802.3 and 802.3u 10/100 Mbps
    • 4* RJ-45 10/100Mbps LAN Port (LAN1 passive PoE in, LAN4 passive PoE out)
    • 1* RJ-45 WAN Port (Passive PoE in)
    • Reset Button
    • WPS Button
    • Two detachable 5dBi antennas
    Frequency Band
    • 2.400GHz ~ 2.484GHz
    Access Protocol
    • CSMA/CA
    Modulation types
    Output Power
    • 802.11b: up to 28 ± 1dBm
    • 802.11g: up to 26 ± 1dBm
    • 802.11n: up to 26 ± 1dBm
    Receive sensitivity
    • -96dBm @ 802.11b
    • -91dBm @ 802.11g
    • -91dBm @ 802.11n
    Operation mode
    • AP, Client, WDS, AP+WDS, Gateway, Bridge, Wireless ISP
    • WEP: WEP(64/128bit),
    • WPA/ WPA2: TKIP / AES, WPS
    Management Features
    • Firmware upgrade via HTTP
    • WAN and LAN side connection statistics
    • Configuration of NAT / NAPT
    • Selection of Bridge or Router Mode
    • PPP user ID and password
    Router Features
    • DHCP Server and Client
    • NAPT (Network Address and Port Translation)
    • ICMP (Internet Control Message Protocol)
    • DDNS (Dynamic Domain Name Service)
    Ethernet Features
    • Compliant with IEEE 802.3 and 802.3u 10/100 Mbps
    • All Ethernet ports support auto-crossover (MDI/MDI-X)
    Power Supply
    • External power adapter DC12V 1A
    • 12V Passive PoE onboard
    • Operating Temperature: -20°C ~ 60°C
    • Operating Humidity: 10%~90% (Non-Condensing)
    • 147 * 98 * 30 mm
    • FCC, CE

  • RP-WR5442HB  Wireless-N 4-P High-Power AP Router, 2T2R

Related Products