RP-3300EX


RP-3300EX
Gigabit Fiber PCI Express Adapter

Datasheet
Manual
Driver

  • RP-3300EX is a Fiber Gigabit Ethernet to PCIe bus adapter that fully complies with all IEEE 802.3z and 1000Base-X standards. It provides up to 2000Mbps full-duplex bandwidth capacity to support high-end servers. In addition, with advanced functions like VLAN filtering packet processing, the adapter provides enhanced performance, flexible configuration and secure networking for users in a standard-based environment. Two LED indicators (LINK/ACT and FDX) on the bracket will help to oversee the board link, activities and full-duplex status.

    • High bandwidth 1000Mbps Network Speed
    • Supports IEEE 802.3z 1000Base-X Fiber Interface
    • Supports Full-Duplex Mode
    • Supports IEEE 802.3x Full-Duplex Flow Control
    • Supports PCIe x1 bus
    • Compliant with PCIe Rev.1.1 Interface
    • Supports Jumbo Frame
    • Supports High Level VLAN Filtering Function
    • Supports IPv6
    • Supports IP headers and TCP / UDP checksums offload
    • Supports on-board screening of VLAN tagged Ethernet frames
    • Support Wake On LAN

  • Standards
    • IEEE 802.3z Gigabit Ethernet 1000Base-X
    • IEEE 802.3x Full-Duplex Flow Control
    • IEEE 802.1Q VLANs
    Connector
    • 850nm SC multi-mode (Standard)
    • 850nm LC multi-mode (by request)
    • 1310nm SC, LC single-mode (by request)
    • 1550nm SC, LC single-mode (by request)
    Fiber Optic Cable
    • 62.5/125, 50/125m multi-mode
    • 9/125mm single-mode
    Data Transfer Mode/Speed
    • Full duplex with NWay flow control
    • 1000Mbps speed
    LED Indicator
    • LINK/ACT, FDX
    Bus Slot
    • PCI-e 1.1 Compliant
    Power Requirement
    • Max. 1.32W, +3.3VDC@0.4A
    Software Support
    • Windows 10 32/64 bits
    • Windows 8 & 8.1 32/64 bits & Server 2012 64 bit
    • Windows 7 32/64 bits & Server 2008 R2 64 bit
    • WinXP & Server 2003 32/64 bits
    • Novell NetWare 5.X and 6.X Servers
    • Novell NetWare DOS Client for ODI 16-bit
    • NDIS2
    • LINUX
    • FreeBSD 7.x and 8.0
    Dimension
    • L108 x H68.5 mm (PCB)
    Environment
    • Operating temperature : 0°C to 50°C
    • Operating Humidity:5% to 90% (Non-Condensing)
    Certification
    • FCC, CE

  • RP-3300EX 1000Base-X Fiber PCI Express Adapter, SC multi-mode
    RP-3300EX/LC 1000Base-X Fiber PCI Express Adapter, LC multi-mode
    RP-3300EX/S20 1000Base-X Fiber PCI Express Adapter, SC Single-Mode 20km

Related Products