24-P Gigabit PoE + 2-10G SFP slot Ethernet Switch

  • RP-PG2402X is a 24-Port (10M/100M/1G) PoE+ and 2 SFP/SFP+ port PoE switch. With its 88Gbps non-blocking switch fabric, it makes the transition to Gigabit Ethernet simply, also speed up of network connection. The energy-efficient, built to last and rigorously tested to provide the reliability of businesses requirement.

    RP-PG2402X delivers electric power output up to 30W by PoE function for each port, and 150W or 250W power budget via Cat.5/5e/6 Ethernet cables. Enables the access of PoE IP Phones, security camera/ network webcam situated in a remote area where power connection is hardly available. And it’s also an ideal option for powering a Wireless Access Point in an indoor working area. In addition, the over-current and circuit shorting protection are supported for ensuring the power supply safety. RP-PG2402X is designed to be a plug-and-play device without any software configuration, also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide the clear operating status of individual port and the whole system.

    RP-PG2402X is a high-performance and environment flexible device for SMBs and Enterprises. It delivers better user experience and saves owners' budgets.

    • 24 ports gigabit non-blocking switch architecture.
    • 2 SFP/ SFP+ ports for optional fiber connection
    • Each Gigabit Switching UTP ports support auto-negotiation-10/100/1000Mbps
    • Auto-MDI/MDI-X detection on each RJ-45 port
    • Support 30W maximum per PoE port, power budget up to 150W or 250W
    • Support over current protection and circuit shorting protection
    • Jumbo Frame: 10K bytes (Max)
    • Supports back-pressure (half duplex) and flow control (IEEE 802.3x)
    • Store-and-forward architecture filters fragment & CRC error packets
    • Provide 88Gbps switch fabric, non-blocking switch architecture
    • 16K MAC address table, automatic source address learning and ageing
    • 4Mbits packet buffering
    • Support extensive LED indicators for network diagnostics
    • Supports IEEE 802.3az Energy Efficient Ethernet
    • Rack mountable


  • Standards
    • IEEE 802.3/3u 10Base-T, 100Base-TX Ethernet
    • IEEE 802.3ab 1000Base-T Ethernet
    • IEEE 802.3z 1000Base-X Ethernet
    • IEEE 802.3x Flow Control capability
    • IEEE802.3ae 10GBase-T Ethernet over fiber for LAN
    • IEEE 802.3az (Energy Efficient Ethernet)
    • IEEE 802.3at/af Power over Ethernet / PSE
    • 24 x 10/100/1000Base-TX RJ-45 Auto-MDI/MDI-X, 802.3at PoE
    • 2 x 1G/10GBase-SR/LR SFP+ slots
    MAC Address
    • 16K
    Buffer Memory
    • 4Mbits
    Transmission Method
    • Store and Forward
    Flow Control
    • Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
    • 65.472Mpps (packet per second)
    Switch Fabric
    • 88Gbps
    PoE Specification
    • PoE Compatible: IEEE 802.3af/at Power over Ethernet / PSE
    • PoE over current protection
    • PoE circuit sorting protection
    • PoE Power Output: Per Port 56V DC, Max. 30 watts (802.3at)
    • Power Budget: Max. 150W or 250W
    • PoE power on RJ-45 pin 1,2 (+) / pin 3, 6 (-)
    • PoE Power Supply Type: End-Span
    LED Indicators
    • Per Port: LINK/ACT, PoE ACT/Status
    • Per Unit: Power
    Power Supply
    • Internal Power 100~240 VAC, 0.5A, 50-60 Hz
    • Operating temperature: 0°C to 40°C
    • Operating Humidity:10% to 90% (Non-Condensing)
    • 440 x 44 x 200mm (WxHxD)
    • FCC, CE

  • RP-PG2402X-150 24-P Gigabit PoE + 2-10G SFP slot Ethernet Switch (150W)
    RP-PG2402X-250 24-P Gigabit PoE + 2-10G SFP slot Ethernet Switch (250W)

Related Products