RP-PG1602

RP-PG1602
16-P Gigabit PoE + 2-1G SFP slot Ethernet Switch

Datasheet
Manual

  • RP-PG1602 is a 16-Port (10M/100M/1G) PoE+ with 2 SFP port PoE switch. With its 36Gbps non-blocking switch fabric, it makes the transition to Gigabit Ethernet simply, also speed up of network connection. The energy-efficient, built to last and rigorously tested to provide the reliability of businesses requirement.

    RP-PG1602 delivers electric power output up to 30W by PoE function for each port, and 250W power budget via Cat.5/5e/6 Ethernet cables. Enables the access of PoE IP Phones, security camera/ network webcam situated in a remote area where power connection is hardly available. And it’s also an ideal option for powering a Wireless Access Point in an indoor working area. In addition, the over-current and circuit shorting protection are supported for ensuring the power supply safety. RP-PG1602 is designed to be a plug-and-play device without any software configuration, also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide the clear operating status of individual port and the whole system.

    RP-PG1602 is a high-performance and environment flexible device for SMBs and Enterprises. It delivers better user experience and saves owners' budgets.

    • 16 Gigabit Switching UTP ports support auto-negotiation, Auto-MDI/MDI-X detection
    • 2 1000Mbps SFP ports for optional fiber connection
    • Support 30W maximum per PoE port, power budget up to 250W
    • Support over current protection and circuit shorting protection
    • Supports back-pressure (half duplex) and flow control (IEEE 802.3x)
    • Store-and-forward architecture filters fragment & CRC error packets
    • Provide 36Gbps switch fabric, non-blocking switch architecture
    • 8K MAC address table, automatic source address learning and ageing
    • 1Mbits packet buffering
    • Support extensive LED indicators for network diagnostics
    • Supports IEEE 802.3az Energy Efficient Ethernet
    • Rack mountable

     

  • Standards
    • IEEE 802.3/3u 10Base-T, 100Base-TX Ethernet
    • IEEE 802.3ab 1000Base-T Ethernet
    • IEEE 802.3z 1000Base-X Ethernet
    • IEEE 802.3x Flow Control capability
    • IEEE 802.3az (Energy Efficient Ethernet)
    • IEEE 802.3at/af Power over Ethernet / PSE
    Interface
    • 16 x 10/100/1000Base-TX RJ-45 Auto-MDI/MDI-X
    • 2 x 1000Base-SR/LR SFP slots
    MAC Address
    • 8K entries
    Buffer Memory
    • 4.1Mbit SRAM Packet buffer
    Transmission Method
    • Store and Forward
    Flow Control
    • Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
    Switch Fabric
    • 36Gbps
    PoE Specification
    • PoE Compatible: IEEE 802.3af/at Power over Ethernet / PSE
    • PoE over current protection
    • PoE circuit sorting protection
    • Power Budget: Max. 250W
    • PoE power on RJ-45 pin 1,2 (+) / pin 3, 6 (-)
    • PoE Power Supply Type: End-Span
    LED Indicators
    • Per Port: LINK/ACT, PoE ACT/Status
    • Per Unit: Power
    Power Supply
    • Internal Power 100~240 VAC, 0.5A, 50-60 Hz
    Environment
    • Operating temperature: 0°C to 40°C
    • Storage Temperature: -20 to 70°C
    • Operating Humidity:10% to 90% (Non-Condensing)
    Dimension
    • 440 x 44 x 200mm (WxHxD)
    Certification
    • FCC, CE

  • RP-PG1602 16-P Gigabit PoE + 2-1G SFP slot Ethernet Switch (250W)

Related Products

RP-PG2402 24-P Gigabit PoE + 2-1G SFP slot Ethernet Switch *802.3at PoE Po...
RP-PG2402X 24-P Gigabit PoE + 2-10G SFP slot Ethernet Switch *802.3at PoE P...
RP-PEG5T/4B 4-Gigabit PoE + 1-Uplink ports Ethernet Switch *802.3at PoE Powe...
RP-PG054 4-Gigabit PoE + 1-Uplink ports Ethernet Switch *802.3at PoE Powe...