RP-PG054

RP-PG054
4-Gigabit PoE + 1-Uplink ports Ethernet Switch

Datasheet
Manual

  • RP-PG054 series is a 5-port 10M/100M/1000M Gigabit Ethernet Switch with one uplink port + 4 ports of Power over Ethernet capability. The PoE+ switch complies with IEEE 802.3af and 802.3at standards and supplies up to 30W per port, with a total PoE power budget of 65W or 120W . It automatically detects IEEE 802.3af/at compliant device connected and provides power and data over a RJ45 cable to these devices.

    Its auto-negotiate is between 10/100/1000 Mbps network speed and duplex. By integrating the data transmitting and power supply, it eliminates the toil of constructing your network. Users can easily connect a Wireless AP or a VoIP phone to this switch without arranging outlets for the wall, ceiling or any unreachable place. It is an ideal solution for office and home users who utilize a combination of PoE and non-PoE enabled devices.

    To ensure the power supply safety, RP-PG054 also supports current protection and circuit shorting protection. Moreover, front panel LEDs provides quick indication of connection speed and status. Plug-and-play function without any software to configure and is also fully compliant with all kinds of network protocols.

    • Comply with IEEE 802.3 af/at PoE standard, support 30W maximum per PoE port
    • Provides flexibility of 4 x 10/100BASE-TX high power PoE ports
    • Wire-speed packet filtering and forwarding rate
    • Supports auto-negotiation and auto-MDI/MDI-X cable detection on each port
    • Store-and-forward architecture filter fragment & CRC error packets
    • IEEE 802.3x flow control protects against lost packets for reliable data transmission
    • Automatic Detection and Protection of Non-standard Ethernet Terminals
    • Support PoE Over Current Protection, PoE circuit short protection
    • Supply suitable power to PoE PD terminals
    • Simple Plug and Play installation
    • Support extensive LED indicators for network diagnostics
    • Compact, sturdy casing

  • Standards
    • IEEE 802.3 10-BASE-T (Ethernet)
    • IEEE 802.3u 100-BASE-TX (Fast Ethernet)
    • IEEE 802.3x Flow Control (full-duplex flow control)
    • IEEE 802.3af Power over Ethernet
    • IEEE 802.3at Power over Ethernet Plus
    Interface
    • 4x 10/100Mbps RJ-45 PoE ports
    • 1x 10/100Mbps RJ-45 Uplink Port
    MAC Address
    • 2K
    Buffer Memory
    • 2KB
    Transmission Method
    • Store and Forward
    Filtering/Forwarding Rates
    • 1000Mbps port - 1,488,000pps
    • 100Mbps port - 148,800pps
    • 10Mbps port - 14,880pps
    Transmission Media
    • 10BaseT Cat. 3, 4, 5 UTP/STP
    • 100BaseTX Cat. 5 UTP/STP
    PoE Specification
    • PoE Compatible: IEEE 802.3af/at Power over Ethernet / PSE
    • PoE over current protection
    • PoE circuit sorting protection
    • Power Budget: Max. 65W(RP-PG054), 120W(RP-PG054F)
    • PoE power on RJ-45 pin 1,2 (+) / pin 3, 6 (-)
    • PoE Power Supply Type: End-Span
    LED Indicators
    • Power, Uplink , LAN1~4 port , PoE 1~4 port
    Power Consumption
    • Max. 3W (no PD device connected)
    Power Supply
    • 100~240VAC/50~60Hz Internal Power of 65w (120w), 56VDC
    Environment
    • Operating temperature : 0°C to 45°C
    • Operating Humidity:10% to 90% (Non-Condensing)
    Dimension
    • 160 x 122 x 44mm
    Certification
    • FCC, CE

  • RP-PG054 5-P Gigabit Ethernet Switch, w/ 4 802.3at PoE Ports (65W)
    RP-PG054F 5-P Gigabit Ethernet Switch, w/ 4 802.3at PoE ports (120W)

Related Products

RP-PEG5T/4 4-Gigabit PoE + 1-Uplink ports Ethernet Switch *802.3at PoE Powe...
RP-PG042 4-P Gigabit PoE + 1-UTP + 1-SFP slot Ethernet Switch *802.3at Po...
RP-PG800E 8-P Gigabit Ethernet PoE+ Switch *802.3at PoE Power Budget 120W ...
RP-PEG08-H 8-P Gigabit Ethernet PoE Switch *802.3at PoE Power Budget 250W ...