RP-PE054


RP-PE054
4-10/100M 802.3at PoE + 1-Uplink ports Ethernet Switch

  • RP-PE054 series is a 5-port 10/100M Fast Ethernet Switch with one uplink port + 4 ports of Power over Ethernet capability. The PoE switch complies with IEEE 802.3af and 802.3at standards and supplies up to 30W per port, with a total PoE power budget of 65W. It automatically detects IEEE 802.3af/at compliant device connected and provides power and data over a RJ45 cable to these devices.

    Its auto-negotiate is between 10/100 Mbps network speed and duplex. By integrating the data transmitting and power supply, it eliminates the toil of constructing your network. Users can easily connect a Wireless AP or a VoIP phone to this switch without arranging outlets for the wall, ceiling or any unreachable place. It is an ideal solution for office and home users who utilize a combination of PoE and non-PoE enabled devices.

    To ensure the power supply safety, RP-PE054 also supports current protection and circuit shorting protection. Moreover, front panel LEDs provides quick indication of connection speed and status. Plug-and-play function without any software to configure and is also fully compliant with all kinds of network protocols.

    • Comply with IEEE 802.3 af/at PoE standard, support 30W maximum per PoE port
    • Provides flexibility of 4 x 10/100BASE-TX high power PoE ports
    • Wire-speed packet filtering and forwarding rate
    • Supports auto-negotiation and auto-MDI/MDI-X cable detection on each port
    • Store-and-forward architecture filter fragment & CRC error packets
    • IEEE 802.3x flow control protects against lost packets for reliable data transmission
    • Automatic Detection and Protection of Non-standard Ethernet Terminals
    • Support PoE Over Current Protection, PoE circuit short protection
    • Supply suitable power to PoE PD terminals
    • Simple Plug and Play installation
    • Support extensive LED indicators for network diagnostics
    • Compact, sturdy casing
    • AC-in Internal Power

     

  • Standards
    • IEEE 802.3 10-BASE-T (Ethernet)
    • IEEE 802.3u 100-BASE-TX (Fast Ethernet)
    • IEEE 802.3x Flow Control (full-duplex flow control)
    • IEEE 802.3af Power over Ethernet
    • IEEE 802.3at Power over Ethernet Plus
    Interface
    • 4* 10/100Mbps RJ-45 PoE ports, auto-negotiation
    • 1* 10/100Mbps RJ-45 Uplink Port
    MAC Address
    • 2K
    Buffer Memory
    • 2KB
    Transmission Method
    • Store and Forward
    Filtering/Forwarding Rates
    • 100Mbps port - 148,800pps
    • 10Mbps port - 14,880pps
    Transmission Media
    • 10BaseT Cat. 3, 4, 5 UTP/STP
    • 100BaseTX Cat. 5 UTP/STP
    PoE Specification
    • PoE Compatible: IEEE 802.3af/at Power over Ethernet / PSE
    • PoE over current protection
    • PoE circuit sorting protection
    • Power Budget: Max. 65W
    • PoE power on RJ-45 pin 1,2 (+) / pin 3, 6 (-)
    • PoE Power Supply Type: End-Span
    LED Indicators
    • Power, Uplink , LAN1~4 port , PoE 1~4 port
    Power Supply
    • Internal Power 100~240VAC/50~60Hz, 48~56VDC, 65W
    Environment
    • Operating temperature : 0°C to 40°C
    • Operating Humidity:10% to 90% (Non-Condensing)
    Dimension
    • 160 x 44 x 122mm (WxHxD)
    Certification
    • FCC, CE

  • RP-PG054 5-Port Fast Ethernet Switch with 4-P 802.3at PoE (65W)

Related Products