RP-PG3226I | RP-PG3226IF


RP-PG3226I | RP-PG3226IF
20-P Gigabit + 4-TP/SFP(100/1G) combo + 2-SFP(100/1G) slot L2+ Managed PoE+ Switch

  • The RP-PG3226I, the next generation L2+ managed switch, provides a reliable infrastructure for your business network. This switch delivers more intelligent features you need to improve the availability of your critical business applications, protects your sensitive information, and optimize your network bandwidth to deliver information and applications more effectively. With PoE (Power over Ethernet) function built in, it provides the ideal combination of affordability and capabilities for entry level networking of small business or enterprise which demands IP Phone, IP Camera or Wireless applications, thus helps you create a more efficient, better-connected workforce.

    • L2+ features provide better manageability, security, QoS, and performance
    • Dual speed SFPs for FE or GbE fiber uplink
    • 802.3az Energy Efficient Ethernet standard
    • IPv6 and s-Flow supports
    • Easy-Port-Configuration for ease of setup in the IP Phone, IP Camera or Wireless environment
    • Supports 802.3at high power PoE plus standard

  • Standards
    • IEEE 802.3 10Base-T Ethernet (twisted-pair copper)
    • IEEE 802.3u 100Base-TX Ethernet (twisted-pair copper)
    • IEEE 802.3ab 1000Base-T Ethernet (twisted-pair copper)
    • IEEE 802.3z 1000Base-SX/LX Ethernet
    • IEEE 802.3at PoE
    • IEEE802.3az Energy Efficient Ethernet
    Interface
    • Port 1 to 24: RJ-45 10/100/1000 Mbps or 802.3af/at PoE
    • Port 21 to 24: UTP/ SFP(100/1G) Combo Dual Media Auto Detection
    • Port 25 to 26: SFP (100/1G)
    • Console Port: RJ-45 console port
    Switching capacity and forwarding rate
    • 38.69 mpps (Capacity in Millions of Packets per Second) (64-byte packets)
    • 52 Gbps (Switching Capacity in Gigabits per Second)
    Jumbo frames
    • Frame sizes up to 9KB supported on Gigabit interfaces
    MAC Table
    • Up to 8K MAC addresses
    Layer 2 Switching
    Spanning Tree Protocol (STP)
    • Standard Spanning Tree 802.1d
    • Rapid Spanning Tree (RSTP) 802.1w
    • Multiple Spanning Tree (MSTP) 802.1s
    Trunking
    • Link Aggregation Control Protocol (LACP) IEEE 802.3ad
    • Up to 18 groups
    • Up to 8 ports per group
    VLAN
    • Support for up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
    • Port-based VLAN
    • 802.1Q tag-based VLAN
    • MAC-based VLAN
    • Management VLAN
    • Private VLAN Edge (PVE)
    Voice VLAN
    • Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
    Generic VLAN Registration (GVRP)
    • Protocols for automatically propagating and configuring VLANs in a bridged domain
    DHCP Relay (Layer 2)
    • Relay of DHCP traffic to DHCP server in different VLAN. Works with DHCP Option 82
    IGMP v1/v2/v3 snooping
    • IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups (source-specific multicasting is also supported)
    IGMP Querier
    • IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
    IGMP Proxy
    • Support IGMP Proxy
    MLD v1/v2 snooping
    • Deliver IPv6 multicast packets only to the required receivers
    Security
    Secure Shell (SSH) Protocol
    • SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported
    Secure Sockets Layer (SSL)
    • SSL Support: Encrypts the http traffic, allowing advance secure access to the browser-based management GUI in the switch
    IEEE 802.1X
    • IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN , single/multiple host mode and single/multiple sessions
    • Supports IGMP-RADIUS based 802.1X
    • Dynamic VLAN assignment
    Port Security
    • Locks MAC Addresses to ports, and limits the number of learned MAC addresses
    IP Source Guard
    • Supports illegal IP address to access to specific port in the switch
    RADIUS/ TACACS+
    • Supports RADIUS and TACACS+ authentication. Switch as a client
    Storm control
    • Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port
    ACLs
    • Support for up to 256 entries
    • Drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code point (DSCP) / IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag
    Quality of Service
    Hardware Priority Queue
    • Support 8 hardware queues
    Scheduling
    • Strict priority and weighted round-robin (WRR)
    • Queue assignment based on DSCP and class of service (802.1p/ CoS)
    Classification
    • Port based; 802.1p VLAN priority based; IPv4/IPv6 precedence/ type of service (ToS) / DSCP based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS
    Rate Limiting
    • Ingress policer; egress shaping and rate control; per VLAN, per port and flow based
    IPv6 applications
    • Web/ SSL, Telnet/ SSH, ping, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), SNMP, Syslog
    Management
    Web GUI interface
    • Built-in switch configuration utility for browser-based device configuration (HTTP/ HTTPs). Supports configuration, system dashboard, maintenance, and monitoring
    Dual Image
    • Dual image provides independent primary and secondary OS files for backup while upgrading
    SNMP
    • SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM)
    Remote Monitoring (RMON)
    • Embedded RMON software agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis
    IPv4 and IPv6 dual stack
    • Coexistence of both protocol stacks to migration
    Firmware upgrade
    • Web browser upgrade (HTTP/ HTTPs) and TFTP
    • Upgrade through console port as well
    Port mirroring
    • Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to single destination port. A single session is supported
    Easy-Configuration-Ports
    • Easily to configure of clients’ QoS and Security capabilities
    Other management
    • Single IP management
    • HTTP/HTTPs; SSH; RADIUS; DHCP Client/ DHCPv6 Client
    • SNTP; cable diagnostics; ping; syslog; Telnet client (SSH secure support)
    s-Flow
    • The industry standard technology for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats
    UPnP
    • The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play
    Green Ethernet
    Link detection
    • Compliant with IEEE802.3az Energy Efficient Ethernet Task Force.
    • Automatically turns off power on Gigabit Ethernet RJ-45 port when detecting link down or idle of client. Active mode is resumed without loss of any packets when the switch detects the link up
    Cable length detection
    • Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter
    Discovery
    Link Layer Discovery Protocol (LLDP) (IEEE802.1AB) with LLDP-MED extensions
    • Used by network devices for advertising their identity, capabilities, and neighbors on a IEEE 802 local area network, principally wired Ethernet.
    Environmental
    PoE Power Budget
    • Max. 185W (with PD device connected)-RP-PG3226I
    • Max. 370W (with PD device connected)-RP-PG3226IF
    Power Supply
    • Internal Power supply 100~240VAC, 50/60 Hz
    Environment
    • Operating temperature : 0°C to 40°C
    • Operating Humidity: 10% to 90% (Non-Condensing)
    Dimension
    • RP-PG3226I: 442(W)x 44(H ) x 300(D ) mm
    • RP-PG3226IF : 442(W)x 44(H ) x 385(D ) mm
    Certification
    • FCC, CE

  • Application

  • RP-PG3226I 20-P Gigabit + 4-TP/SFP(100/1G) combo + 2-SFP(100/1G) slot
    L2+ Managed PoE+ Switch(185W)
    RP-PG3226IF RP-PG3226IF 20-P Gigabit + 4-TP/SFP(100/1G) combo + 2-SFP(100/1G) slot
    L2+ Managed PoE+ Switch(370W)

Related Products