RP-PG2610I


RP-PG2610I
8-P Gigabit + 2-TP/SFP (100/1G) combo L2+ Managed PoE+ Switch

Datasheet
Manual
QIG
 Firmware

  • RP-PG2610I is a 10-port Managed Gigabit PoE Switch which delivers 8 (10M/100M/1G) RJ45 ports, 2 Combo GbE RJ45/SFP ports and RJ45 Console port.

    RP-PG2626I offers full suite of comprehensive Layer 2 switching capabilities such as ACL, Spanning Tree , DHCP Relay ,IGMP QoS functions... etc., and provides advanced L3 features like Static Route and IPv6 / IPv4 management functions. RP-PG2610I’s 10/100/1000 Mbps ports are PoE-enabled, supporting 8 ports PoE+ with a total power budget of 130W.  RP-PG2610I provides the ideal combination of affordability and capabilities for small- and medium-size businesses which demands IP Phone, IP Camera or Wireless applications, thus helps you create a more efficient, better-connected workforce.

    RP-PG2610I complies with 802.3az, the green feature enables the switch to automatically detect the length of connected Ethernet cables and adjust power usage accordingly. RP-PG2610I comes with a fanless design in a compact 8.7” desktop cabinet, also offering a 19” rack mounting brackets optional.

    • L2+ features provide better manageability, security, QoS, and performance.
    • PoE Port configuration and scheduling, 802.3at high power PoE plus standard
    • Built in Device Management System (DMS)
    • DHCP Server
    • IPv4/IPv6 L3 static route
    • Support SSH/SSL secured management
    • Support SNMP v1/v2c/v3
    • Support RMON groups 1,2,3,9
    • Support sFlow
    • Support IGMP v1/v2/v3 Snooping
    • Support MLD v1/v2 Snooping
    • Support RADIUS and TACACS+ authentication
    • Support IP Source Guard
    • Support DHCP Relay (Option 82)
    • Support DHCP Snooping
    • Support ACL and QCL for traffic filtering
    • Support 802.1d(STP), 802.1w(RSTP) and 802.1s(MSTP)
    • Support LACP and static link aggregation
    • Support Q-in-Q double tag VLAN
    • Support GVRP dynamic VLAN
    • IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet
    • Fanless design

  • Standards
    • IEEE 802.3/3u 10Base-T, 100Base-TX Ethernet
    • IEEE 802.3ab 1000Base-T Ethernet
    • IEEE 802.3z 1000Base-X Ethernet
    • IEEE 802.3x Flow Control capability
    • IEEE802.3at/af PoE standard
    • IEEE802.3az Energy Efficient Ethernet
    Interface
    • Port 1 to 8: RJ-45 10/100/1000Mbps with 802.3af/at PoE, auto MDI/X
    • Port 9 to 10: RJ45/SFP(100/1000Mbps) combo
    • RJ45 Console port
    • Reset Button
    Forwarding Capacity
    • 14.88 Mpps
    Switching Capacity
    • 20 Gbps
    Jumbo frames
    • 9216 Bytes
    MAC Table
    • 8K MAC addresses
    Layer 2 Switching
    Spanning Tree Protocol (STP)
    • Standard Spanning Tree 802.1d
    • Rapid Spanning Tree (RSTP) 802.1w
    • Multiple Spanning Tree (MSTP) 802.1s
    Trunking
    • Link Aggregation Control Protocol (LACP) IEEE 802.3ad
    • Up to 5 groups
    • Up to 2 ports per group
    VLAN
    • Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
    • Port-based VLAN
    • 802.1Q tag-based VLAN
    • MAC-based VLAN
    • Management VLAN
    • Private VLAN Edge (PVE)
    • Q-in-Q (double tag) VLAN
    • Voice VLAN
    • GARP VLAN Registration Protocol (GVRP)
    DHCP Relay
    • Relay of DHCP traffic to DHCP server in different VLAN.
    • Works with DHCP Option 82
    IGMP v1/v2/v3 snooping
    • IGMP limits bandwidth-intensive multicast traffic to only the requesters
    • Supports 1024 multicast groups
    IGMP Querier
    • IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
    IGMP Proxy
    • IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router
    MLD v1/v2 snooping
    • Deliver IPv6 multicast packets only to the required receivers
    Layer 3 Switching
    IPv4 Static Routing
    • IPv4 Unicast: Static routing
    IPv6 Static Routing
    • IPv6 Unicast: Static routing
    Security
    Secure Shell (SSH)
    • SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported
    Secure Sockets Layer (SSL)
    • SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch
    IEEE 802.1X
    • IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN , single/multiple host mode and single/multiple sessions
    • Supports IGMP-RADIUS based 802.1X
    • Dynamic VLAN assignment
    Layer 2 Isolation Private VLAN Edge (PVE)
    • PVE (also knows as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks
    Port Security
    • Locks MAC addresses to ports, and limits the number of learned MAC address
    IP Source Guard
    • Prevents illegal IP address from accessing to specific port in the switch
    RADIUS/ TACACS+
    • Supports RADIUS and TACACS+ authentication. Switch as a client
    Storm control
    • Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port
    DHCP Snooping
    • A feature acts as a firewall between untrusted hosts and trusted DHCP servers
    ACLs
    • Supports up to 256 entries. Drop or rate limitation based on:
    • Source and destination MAC, VLAN ID or IP address, protocol, port
    • Differentiated services code point (DSCP) / IP precedence
    • TCP/ UDP source and destination ports
    • 802.1p priority
    • Ethernet type
    • Internet Control Message Protocol (ICMP) packets
    • TCP flag
    Quality of Service
    Hardware Queue
    • Support 8 hardware queues
    Scheduling
    • Strict priority and weighted round-robin (WRR)
    • Queue assignment based on DSCP and class of service
    Classification
    • Port based
    • 802.1p VLAN priority based
    • IPv4/IPv6 precedence / DSCP based
    • Differentiated Services (DiffServ)
    • Classification and re-marking ACLs
    Rate Limiting
    • Ingress policer
    • Egress shaping and rate control
    • Per port
    Management
    DHCP Server
    • Support DHCP server to assign IP to DHCP clients
    Remote Monitoring (RMON)
    • Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis
    Port mirroring
    • Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported
    UPnP
    • The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play
    s-Flow
    • The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats
    IEEE 802.1ab (LLDP)
    • Used by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network
    • Support LLDP-MED extensions
    Web GUI Interface
    • Built-in switch configuration utility for browser-based device configuration
    CLI
    • For users to configure/manage switches in command line modes
    Dual Image
    • Independent primary and secondary images for backup while upgrading
    SNMP
    • SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM)
    Firmware Upgrade
    • Web browser upgrade (HTTP/ HTTPs) and TFTP
    • Upgrade through console port as well
    NTP
    • Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched
    Other Management
    • HTTP/HTTPs; SSH
    • DHCP Client/ DHCPv6 Client
    • Cable Diagnostics
    • Ping
    • Syslog
    • Telnet Client
    • IPv6 Management
    Power over Ethernet (PoE)
    Port Configuration
    • Supports per port PoE configuration function
    PoE Scheduling
    • Supports per port PoE scheduling to turn on/off the PoE devices (PDs)
    Auto-checking
    • Check the link status of PDs. Reboot PDs if there is no responses
    Power Delay
    • The switch provides power to the PDs based on delay time when PoE switch boots up, in order to protect switch from misuse of the PDs
    PoE Power Budget
    • 130 Watts
    Power Supply
    • Internal Power supply 100~240VAC, 50/60 Hz
    Environment
    • Operating temperature: 0°C to 45°C
    • Storage Temperature: -20 to 70°C
    • Operating Humidity: 10% to 90% (Non-Condensing)
    Dimension
    • 220 x 44 x 242mm (WxHxD)
    Certification
    • FCC, CE

  • application

  • RP-PG2610I  8-P Gigabit + 2-TP/SFP(100/1G) combo L2+ Managed PoE+ Switch (130W)

Related Products