RP-PG1610W


RP-PG1610W
8-P Gigabit + 2-TP/SFP (100/1G) combo Web smart PoE+ Switch

  • RP-PG1610W is a 10-port Web Smart Gigabit PoE Switch which delivers 8 (10M/100M/1G) RJ45 ports, 2 Combo GbE RJ45/SFP ports.

    RP-PG1610W offers powerful network switching engine such as Trunking, VLAN, IGMP snooping functions…etc. and supports smooth IPv6 migration for future expansions. RP-PG1610W’s 10/100/1000 Mbps ports are PoE-enabled, supporting 8 ports PoE+ with a total power budget of 130W. It provides the ideal combination of affordability and capabilities for entry level networking of a small business or a branch office of an enterprise which demands IP Phone, IP Camera or Wireless applications, thus helps you to create an efficient, flexible and easier-connected workforce.

    RP-PG1610W complies with 802.3az Energy Efficient Ethernet (EEE) features can reduce energy consumption of Ethernet devices through defining low-power modes and adjusting the operating timeframe to help saving the related costs effectively. RP-PG1610W comes with a fanless design in a compact desktop cabinet, also offering a 19” rack mounting brackets optional.

    • PoE Port configuration and scheduling
    • 802.3at high power PoE plus standard
    • Built in Device Management System (DMS)
    • DHCP Server
    • IPv4/IPv6 L3 static route
    • Support SNMP v1/v2c/v3
    • Support RMON groups 1,2,3,9
    • Support IGMP v1/v2/v3 Snooping
    • Support RADIUS authentication
    • Support IP Source Guard
    • Support DHCP Snooping
    • Support ACL and QCL for traffic filtering
    • Support 802.1d(STP), 802.1w(RSTP) and 802.1s(MSTP)
    • Support LACP and static link aggregation
    • Support Q-in-Q double tag VLAN
    • IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet
    • Fanless design

  • Standards
    • IEEE 802.3/3u 10Base-T, 100Base-TX Ethernet
    • IEEE 802.3ab 1000Base-T Ethernet
    • IEEE 802.3z 1000Base-X Ethernet
    • IEEE 802.3x Flow Control capability
    • IEEE 802.3at/af PoE Standard
    • IEEE802.3az Energy Efficient Ethernet
    Interface
    • Port 1 to 8: RJ-45 10/100/1000Mbps with 802.3af/at PoE, auto MDI/X
    • Port 9 to 10: RJ45/SFP(100/1000Mbps) combo
    • Reset Button
    Forwarding Capacity
    • 14.88 Mpps
    Switching Capacity
    • 20 Gbps
    Jumbo frames
    • 9216 Bytes
    MAC Table
    • 8K MAC addresses
    Layer 2 Switching
    Spanning Tree Protocol (STP)
    • Standard Spanning Tree 802.1d
    • Rapid Spanning Tree (RSTP) 802.1w
    • Multiple Spanning Tree (MSTP) 802.1s
    Trunking
    • Link Aggregation Control Protocol (LACP) IEEE 802.3ad
    • Up to 5 groups
    • Up to 2 ports per group
    VLAN
    • Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
    • Port-based VLAN
    • 802.1Q tag-based VLAN
    • Management VLAN
    • Q-in-Q (double tag) VLAN
    IGMP v1/v2/v3 snooping
    • IGMP limits bandwidth-intensive multicast traffic to only the requesters
    • Supports 1024 multicast groups
    IGMP Querier
    • IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
    IGMP Proxy
    • IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router
    Layer 3 Switching
    IPv4 Static Routing
    • IPv4 Unicast: Static routing
    IPv6 Static Routing
    • IPv6 Unicast: Static routing
    Security
    Secure Shell (SSH)
    • SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported
    Secure Sockets Layer (SSL)
    • SSL Support: Encrypts the http traffic, allowing advance secure access to the browser-based management GUI in the switch
    IEEE 802.1X
    • IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN , single/multiple host mode and single/multiple sessions
    • Supports IGMP-RADIUS based 802.1X
    • Dynamic VLAN assignment
    Layer 2 Isolation Private VLAN Edge (PVE)
    • PVE (also knows as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks
    Port Security
    • Locks MAC addresses to ports, and limits the number of learned MAC address
    Storm control
    • Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port
    Quality of Service
    Hardware Queue
    • Support 8 hardware queues
    Scheduling
    • Strict priority and weighted round-robin (WRR)
    • Queue assignment based on DSCP and class of service
    Classification
    • Port based
    • 802.1p VLAN priority based
    • IPv4/IPv6 precedence / DSCP based
    • Differentiated Services (DiffServ)
    • Classification and re-marking ACLs
    Rate Limiting
    • Ingress policer
    • Egress shaping and rate control
    • Per port
    Management
    DHCP Server
    • Support DHCP server to assign IP to DHCP clients
    Port mirroring
    • Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported
    UPnP
    • The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play
    IEEE 802.1ab (LLDP)
    • Used by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network
    • Support LLDP-MED extensions
    Web GUI Interface
    • Built-in switch configuration utility for browser-based device configuration
    Dual Image
    • Independent primary and secondary images for backup while upgrading
    SNMP
    • SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM)
    Firmware Upgrade
    • Web browser upgrade (HTTP/ HTTPs) and TFTP
    NTP
    • Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched
    Other Management
    • HTTP/HTTPs
    • DHCP Client/ DHCPv6 Client
    • Cable Diagnostics
    • Ping
    • Syslog
    • IPv6 Management
    Power over Ethernet (PoE)
    Port Configuration
    • Supports per port PoE configuration function
    PoE Scheduling
    • Supports per port PoE scheduling to turn on/off the PoE devices (PDs)
    Auto-checking
    • Check the link status of PDs. Reboot PDs if there is no responses.
    Power Delay
    • The switch provides power to the PDs based on delay time when PoE switch boots up, in order to protect switch from misuse of the PDs
    PoE Power Budget
    • 130 Watts
    Power Supply
    • Internal Power supply 100~240VAC, 50/60 Hz
    Environment
    • Operating temperature: 0°C to 45°C
    • Storage Temperature: -20 to 70°C
    • Operating Humidity: 10% to 90% (Non-Condensing)
    Dimension
    • 220 x 44 x 242mm (WxHxD)
    Certification
    • FCC, CE

  • Application

  • RP-PG1610W 8-P Gigabit + 2-TP/SFP(100/1G) combo Web Smart PoE+ Switch (130W)

Related Products