RP-VC102EM

RP-VC102EM
Ethernet over VDSL2 Converter

  • RP-VC102EM is a VDSL2 LAN Extender providing a broadband transmission up to 100/100Mbps for downstream/upstream over single pair copper line for point-to-point Ethernet connectivity.  With 100/100Mbps data rate, RP-VC102EM supports transmission distance up to 300 meters and less data rate for 2km long range connection. Users may also select a fixed data rate or a fixed SNR margin for different copper line ranging.

    The converter is plug-n-play without the need to configure software, and it is fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide the operating status of the system.

    RP-VC102EM supports the signal conversion between traditional Ethernet and innovative VDSL technology. It is ideal for providing video-on-demand and multi-media service to apartment, hotel and campus without rewiring cable consideration. Moreover, the distance expansion also provides wide range coverage.  The device is a right solution to integrate current Ethernet application with the new building phone line networking technology, like hotel, office and apartment environment.

    • Compliant with ITU-T G.993.1, G.993.2 VDSL2 Standard
    • VDSL2 Profiles: 8a/b/c/d, 12a/b, 17a, 30a
    • Band Plan 997 and 998 supported
    • Supports Back-to-back applications
    • Annex A, Annex B, Annex C supported
    • US0 Supported
    • OLR Supported
    • Compliant with VDSL2 MIB
    • Ethernet packets over VDSL2
    • 100/100Mbps DownStream/ UpStream for distance up to 300 meters
    • Trellis Coding support up to 1024 Discrete Multi-Tone (DMT) bin
    • Supports DSL connection up to 2000 meters
    • Selectable Fast and Interleaved modes
    • Selectable fixed data rate and fixed SNR margin
    • Auto MDIX for 10/100 BaseT Ethernet LAN Ports
    • 4 Dip Switches for Master/Slave Configurations
    • Low-Latency for Video/Voice/Data applications

     

  • Standard
    • IEEE802.3 standard
    • IEEE802.3u standard
    • Ethernet over VDSL2
    • ITU-T G.993.1, G.993.2 VDSL2
    Interface
    • 2 x RJ-45 10/100Mbps Ethernet ports
    • 1 x RJ-11 connector for EoVDSL2
    • 1 x RJ-11 connector for POTS telephone connection
    • DIP switch for mode selection
    Network Media
    • RJ-45 (Ethernet): Category 3, 4, 5 UTP/STP
    • RJ-11 (EoVDSL2): Twisted-Pair phone wire
    VDSL Transmission
    • ITU-T G.993.1/2, SG15Q4 DMT Compliance
    • Trellis Code with 1024 DMT bins
    • Max Data Rate: 100/100 Mbps
    • RJ-11 Connector
    POTS
    • Optional Annex A, B, or C
    • RJ-11 Connector
    LAN
    • Auto-Detection for 10/100 BaseT and Half/Full duplex
    • High performance bridge for Ethernet extension
    • Fully compatible with IEEE802.3/IEEE802.3u
    • Automatic MDIX Function
    • RJ-45 Connector
    LED indicators
    • Power, DSL, LAN1, LAN2,
    • M/S(Master/Slave Selection )
    Power Supply
    • External Power Adapter DC12V
    Environment
    • Operating Temperature: 0°C~ 50°C
    • Operating Humidity: 5%~95% (Non-Condensing)
    Dimension
    • 120 x 90 x 28 mm
    Certifications
    • CE, FCC
    Data Rate & Distance
    • Performance in AWG 26 Line at 6dB without rate limit
    Down Stream

    Data Rate (Mbps)

    		 Up Stream

    Data Rate (Mbps)

    		 Distance

    (feet)
    100 100 1000
    100 60 1200
    90 44 1350
    80 36 1500
    70 27 1750
    60 18 2000
    48 11 2500
    39 8 3000
    35 3.5 3500
    28 0.3 4000

     

     

  • RP-VC102EM-application

  • RP-VC102EM Ethernet over VDSL2 Converter

Related Products

RP-VC102EMP Ethernet over VDSL2 Converter, w/ 802.3af PoE *EoVDSL2 supports ...
RP-VC102CM Coaxial over VDSL2 converter *100/100Mbps for distance up to 700...
RP-VC111T Ethernet over VDSL2 Extender *Voice and Data work on the same te...