Standards |
- IEEE 802.3 10Base-T Ethernet
- IEEE 802.3u 100Base-TX Ethernet
- IEEE 802.3ab 1000Base-T Ethernet
- IEEE 802.3z 1000Base-X Ethernet
- IEEE 802.3x Flow Control capability
- IEEE802.3az Energy Efficient Ethernet
|
Interface |
- Port 1 to 24: RJ-45 10/100/1000Mbps, auto MDI/X
- Port 25 to 26: SFP(100/1000Mbps) slot
- Reset Button
|
Forwarding Capacity |
|
Switching Capacity |
|
Jumbo frames |
|
MAC Table |
|
Layer 2 Switching |
|
Spanning Tree Protocol (STP) |
- Standard Spanning Tree 802.1d
- Rapid Spanning Tree (RSTP) 802.1w
- Multiple Spanning Tree (MSTP) 802.1s
|
Trunking |
- Link Aggregation Control Protocol (LACP) IEEE 802.3ad
- Static aggregation
|
VLAN |
- Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
- Port-based VLAN
- 802.1Q tag-based VLAN
- Protocol based VLAN
- IP subnet-based VLAN
- Private VLAN Edge (PVE)
- MAC-based VLAN
- Q-in-Q (double tag) VLAN
- Voice VLAN
- GARP VLAN Registration Protocol (GVRP) (option)
|
DHCP Relay |
- Relay of DHCP traffic to DHCP server in different VLAN.
- Works with DHCP Option 82
|
IGMP snooping |
- IGMP limits bandwidth-intensive multicast traffic to only the requesters
- Supports 512 multicast groups
|
IGMP Querier |
- IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
|
IGMP Proxy |
- IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router
|
MLD v1/v2 Snooping |
- Delivers IPv6 multicast packets only to the required receivers
|
Multicast VLAN Registration (MVR) |
- It uses a dedicated manually configured VLAN, called the multicast VLAN, to forward multicast traffic over Layer 2 network in conjunction with IGMP snooping
|
Security |
|
Secure Shell (SSH) |
- SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported
|
Secure Sockets Layer (SSL) |
- SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch
|
IEEE 802.1X |
- IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN, single/multiple host mode and single/multiple sessions
- Supports IGMP-RADIUS based 802.1X
- Dynamic VLAN assignment
|
Layer 2 Isolation Private VLAN Edge |
- PVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks
|
Port Security |
- Locks MAC addresses to ports, and limits the number of learned MAC address
|
IP Source Guard |
- Prevents illegal IP address from accessing to specific port in the switch
|
RADIUS/ TACACS+ |
- Supports RADIUS and TACACS+ authentication. Switch as a client
|
Storm control |
- Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port
|
DHCP Snooping |
- A feature acts as a firewall between untrusted hosts and trusted DHCP servers
|
Loop Protection |
- To prevent unknown unicast, broadcast and multicast loops in Layer 2 switching configurations
|
ACLs |
- Supports up to 384 entries. Drop or rate limitation based on:
- Source and destination MAC, VLAN ID or IP address, protocol, port,
- Differentiated services code point (DSCP) / IP precedence
- TCP/ UDP source and destination ports
- 802.1p priority
- Ethernet type
- Internet Control Message Protocol (ICMP) packets
- TCP flag
|
Quality of Service |
|
Hardware Queue |
- Support 8 hardware queues
|
Scheduling |
- Strict priority and weighted round-robin (WRR)
- Queue assignment based on DSCP and class of service
|
Classification |
- Port based
- 802.1p VLAN priority based
|
Rate Limiting |
- Ingress policer
- Egress shaping and rate control
- Per port
|
Management |
|
Port mirroring |
- Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported
|
IEEE 802.1ab (LLDP) |
- Used by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network
- Support LLDP-MED extensions
|
Web GUI Interface |
- Built-in switch configuration utility for browser-based device configuration
|
Dual Image |
- Independent primary and secondary images for backup while upgrading
|
UPnP |
- The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play
|
DHCP Server |
- Support DHCP server to assign IP to DHCP clients
|
Remote Monitoring (RMON) |
- Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis
|
SNMP |
- SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM)
|
Firmware Upgrade |
- Web browser upgrade (HTTP/ HTTPs) and TFTP
|
NTP |
- Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched
|
Other Management |
- HTTP/HTTPs
- DHCP Client/ DHCPv6 Client
- Cable Diagnostics
- Syslog
- Telnet Client; SSH
- IPv6 Management
|
Power Supply |
- Internal Power supply 100~240VAC, 50/60 Hz
|
Environment |
- Operating temperature: 0°C to 50°C
- Storage Temperature: -20 to 70°C
- Operating Humidity: 10% to 90% (Non-Condensing)
|
Dimension |
|
Certification |
|