RP-G1510W


RP-G1510W
8-P Gigabit + 2-SFP (100/1G) slot Web smart Switch

Datasheet
Manual
QIG
Firmware

  • RP-G1510W web smart+ managed GbE switch is the next-generation Ethernet switch offering powerful L2 features with better functionality and usability. That delivers the cost-effectively business and transports Ethernet services via fiber or copper connections.

    RP-G1510W delivers 8 (10M/100M/1G) RJ45 ports and 2 GbE SFP ports. RP-G1510W provides high HW performance and environment flexibility for SMBs and Enterprises.

    The embedded Device Managed System (DMS) features provide users with the benefits of easy-to-use/configure/install/troubleshoot in the video surveillance, wireless access, and other SMBs and Enterprises applications. RP-G1510W is ideal to deliver management simplicity, better user experience, and lowest total cost of ownership.

    • L2+ features provide better manageability, security, QoS, and performance.
    • Support IPv4/IPv6 dual stack management
    • Support SSH/SSL secured management
    • Support SNMP v1/v2c
    • Support RMON groups 1,2,3,9
    • Support sFlow (Option)
    • Support IGMP v1/v2 Snooping
    • Support MLD v1/v2 Snooping
    • Support RADIUS and TACACS+ authentication
    • Support IP Source Guard
    • Support DHCP Relay (Option 82)
    • Support DHCP Snooping
    • Support 802.1d(STP), 802.1w(RSTP) and 802.1s(MSTP)
    • Support LACP and static link aggregation
    • Support Q-in-Q double tag VLAN
    • Support GVRP dynamic VLAN
    • IEEE 802.3az EEE Energy Efficient Ethernet standard for green Ethernet
    • Fanless design
    • Optional 19" Rack-mounted bracket

  • Standards
    • IEEE 802.3 10Base-T Ethernet
    • IEEE 802.3u 100Base-TX Ethernet
    • IEEE 802.3ab 1000Base-T Ethernet
    • IEEE 802.3z 1000Base-X Ethernet
    • IEEE 802.3x Flow Control capability
    • IEEE802.3az Energy Efficient Ethernet
    Interface
    • Port 1 to 8: RJ-45 10/100/1000Mbps, auto MDI/X
    • Port 9 to 10: SFP(100/1000Mbps) slot
    • Reset Button
    Forwarding Capacity
    • 14.88 Mpps
    Switching Capacity
    • 20 Gbps
    Jumbo frames
    • 9216 Bytes
    MAC Table 
    • 8K MAC addresses
    Layer 2 Switching
    Spanning Tree Protocol (STP)
    • Standard Spanning Tree 802.1d
    • Rapid Spanning Tree (RSTP) 802.1w
    • Multiple Spanning Tree (MSTP) 802.1s
    Trunking
    • Link Aggregation Control Protocol (LACP) IEEE 802.3ad
    • Static aggregation
    VLAN
    • Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
      • Port-based VLAN
      • 802.1Q tag-based VLAN
      • Protocol based VLAN
      • IP subnet-based VLAN
      • Private VLAN Edge (PVE)
      • MAC-based VLAN
      • Q-in-Q (double tag) VLAN
      • Voice VLAN
      • GARP VLAN Registration Protocol (GVRP) (option)
    DHCP Relay
    • Relay of DHCP traffic to DHCP server in different VLAN.
    • Works with DHCP Option 82
    IGMP snooping
    • IGMP limits bandwidth-intensive multicast traffic to only the requesters
    • Supports 512 multicast groups
    IGMP Querier
    • IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
    IGMP Proxy
    • IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router
    MLD v1/v2 Snooping
    • Delivers IPv6 multicast packets only to the required receivers
    Multicast VLAN Registration (MVR)
    • It uses a dedicated manually configured VLAN, called the multicast VLAN, to forward multicast traffic over Layer 2 network in conjunction with IGMP snooping
    Security
    Secure Shell (SSH) 
    • SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported
    Secure Sockets Layer (SSL)
    • SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch
    IEEE 802.1X
    • IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN, single/multiple host mode and single/multiple sessions
    • Supports IGMP-RADIUS based 802.1X
    • Dynamic VLAN assignment
    Layer 2 Isolation Private VLAN Edge
    • PVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks
    Port Security
    • Locks MAC addresses to ports, and limits the number of learned MAC address
    IP Source Guard
    • Prevents illegal IP address from accessing to specific port in the switch
    RADIUS/ TACACS+
    • Supports RADIUS and TACACS+ authentication. Switch as a client
    Storm control
    • Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port
    DHCP Snooping
    • A feature acts as a firewall between untrusted hosts and trusted DHCP servers
    Loop Protection
    • To prevent unknown unicast, broadcast and multicast loops in Layer 2 switching configurations
    ACLs
    • Supports up to 384 entries. Drop or rate limitation based on:
      • Source and destination MAC, VLAN ID or IP address, protocol, port,
      • Differentiated services code point (DSCP) / IP precedence
      • TCP/ UDP source and destination ports
      • 802.1p priority
      • Ethernet type
      • Internet Control Message Protocol (ICMP) packets
      • TCP flag
    Quality of Service
    Hardware Queue
    • Support 8 hardware queues
    Scheduling
    • Strict priority and weighted round-robin (WRR)
    • Queue assignment based on DSCP and class of service
    Classification
    • Port based
    • 802.1p VLAN priority based
    Rate Limiting
    • Ingress policer
    • Egress shaping and rate control
    • Per port
    Management
    Port mirroring
    • Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported
    IEEE 802.1ab (LLDP)
    • Used by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network
    • Support LLDP-MED extensions
    Web GUI Interface
    • Built-in switch configuration utility for browser-based device configuration
    Dual Image
    • Independent primary and secondary images for backup while upgrading
    UPnP
    • The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play
    DHCP Server
    • Support DHCP server to assign IP to DHCP clients
    Remote Monitoring (RMON)
    • Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis
    SNMP
    • SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM)
    Firmware Upgrade
    • Web browser upgrade (HTTP/ HTTPs) and TFTP
    NTP
    • Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched
    Other Management
    • HTTP/HTTPs
    • DHCP Client/ DHCPv6 Client
    • Cable Diagnostics
    • Syslog
    • Telnet Client; SSH
    • IPv6 Management
    Power Supply
    • Internal Power supply 100~240VAC, 50/60 Hz
    Environment
    • Operating temperature: 0°C to 50°C
    • Storage Temperature: -20 to 70°C
    • Operating Humidity: 10% to 90% (Non-Condensing)
    Dimension
    • 220 x 44 x 134mm (WxHxD)
    Certification
    • FCC, CE

  • RP-G1510W  8-P Gigabit + 2-SFP (100/1G) slot Web smart Switch

Related Products