| Standards |
- IEEE 802.3 10Base-T Ethernet (twisted-pair copper)
- IEEE 802.3u 100Base-TX Ethernet (twisted-pair copper)
- IEEE 802.3ab 1000Base-T Ethernet (twisted-pair copper)
- IEEE 802.3z 1000Base-X Ethernet
- IEEE 802.3x Flow Control capability
- IEEE802.3az Energy Efficient Ethernet
|
| Interface |
- Port 1 to 24: RJ-45 10/100/1000Mbps, auto MDI/X
- Port 25 to 26: RJ45/SFP(100/1000Mbps) combo
- RJ-45 Console port
- Reset Button
|
| Forwarding Capacity |
|
| Switching Capacity |
|
| Jumbo frames |
|
| MAC Table |
|
| Layer 2 Switching |
|
| Spanning Tree Protocol (STP) |
- Standard Spanning Tree 802.1d
- Rapid Spanning Tree (RSTP) 802.1w
- Multiple Spanning Tree (MSTP) 802.1s
|
| Trunking |
- Link Aggregation Control Protocol (LACP) IEEE 802.3ad
- Up to 13 groups
- Up to 4 ports per group
|
| VLAN |
- Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
- Port-based VLAN
- 802.1Q tag-based VLAN
- MAC-based VLAN
- Management VLAN
- Private VLAN Edge (PVE)
- Q-in-Q (double tag) VLAN
- Voice VLAN
- GARP VLAN Registration Protocol (GVRP)
|
| DHCP Relay |
- Relay of DHCP traffic to DHCP server in different VLAN.
- Works with DHCP Option 82
|
| IGMP v1/v2/v3 snooping |
- IGMP limits bandwidth-intensive multicast traffic to only the requesters
- Supports 1024 multicast groups
|
| IGMP Querier |
- IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
|
| IGMP Proxy |
- IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router
|
| MLD v1/v2 snooping |
- Deliver IPv6 multicast packets only to the required receivers
|
| Layer 3 Switching |
|
| IPv4 Static Routing |
- IPv4 Unicast: Static routing
|
| IPv6 Static Routing |
- IPv6 Unicast: Static routing
|
| Security |
|
| Secure Shell (SSH) |
- SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported
|
| Secure Sockets Layer (SSL) |
- SSL Support: Encrypts the http traffic, allowing advance secure access to the browser-based management GUI in the switch
|
| IEEE 802.1X |
- IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN , single/multiple host mode and single/multiple sessions
- Supports IGMP-RADIUS based 802.1X
- Dynamic VLAN assignment
|
| Layer 2 Isolation Private VLAN Edge (PVE) |
- PVE (also knows as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks
|
| Port Security |
- Locks MAC addresses to ports, and limits the number of learned MAC address
|
| IP Source Guard |
- Prevents illegal IP address from accessing to specific port in the switch
|
| RADIUS/ TACACS+ |
- Supports RADIUS and TACACS+ authentication. Switch as a client
|
| Storm control |
- Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port
|
| DHCP Snooping |
- A feature acts as a firewall between untrusted hosts and trusted DHCP servers
|
| ACLs |
- Supports up to 256 entries. Drop or rate limitation based on:
- Source and destination MAC, VLAN ID or IP address, protocol, port
- Differentiated services code point (DSCP) / IP precedence
- TCP/ UDP source and destination ports
- 802.1p priority
- Ethernet type
- Internet Control Message Protocol (ICMP) packets
- TCP flag
|
| Quality of Service |
|
| Hardware Queue |
- Support 8 hardware queues
|
| Scheduling |
- Strict priority and weighted round-robin (WRR)
- Queue assignment based on DSCP and class of service
|
| Classification |
- Port based
- 802.1p VLAN priority based
- IPv4/IPv6 precedence / DSCP based
- Differentiated Services (DiffServ)
- Classification and re-marking ACLs
|
| Rate Limiting |
- Ingress policer
- Egress shaping and rate control
- Per port
|
| Management |
|
| DHCP Server |
- Support DHCP server to assign IP to DHCP clients
|
| Remote Monitoring (RMON) |
- Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis
|
| Port mirroring |
- Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported
|
| UPnP |
- The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play
|
| s-Flow |
- The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats
|
| IEEE 802.1ab (LLDP) |
- Used by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network
- Support LLDP-MED extensions
|
| Web GUI Interface |
- Built-in switch configuration utility for browser-based device configuration
|
| CLI |
- For users to configure/manage switches in command line modes
|
| Dual Image |
- Independent primary and secondary images for backup while upgrading
|
| SNMP |
- SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM)
|
| Firmware Upgrade |
- Web browser upgrade (HTTP/ HTTPs) and TFTP
- Upgrade through console port as well
|
| NTP |
- Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched
|
| Other Management |
- HTTP/HTTPs; SSH
- DHCP Client/ DHCPv6 Client
- Cable Diagnostics
- Ping
- Syslog
- Telnet Client
- IPv6 Management
|
| Power Supply |
- Internal Power supply 100~240VAC, 50/60 Hz
|
| Environment |
- Operating temperature: 0°C to 45°C
- Storage Temperature: -20 to 70°C
- Operating Humidity: 10% to 90% (Non-Condensing)
|
| Dimension |
|
| Weight |
|
| Certification |
|
Datasheet 
Firmware
