95W Industrial Gigabit PoE+ Injector


  • The RP-IPJ811-95W a high power single port Industrial POE Injector provides PoE power budget up to 95W.  The device supports 10/100/1000Mbps data transmission and is powered with 48-56 Volts DC.

    RP-IPJ811-95W  is well suited for applications in deploying IP surveillance, WiFi AP or LoRa and for a broad range of applications. It is being rigorously tested for your Security, Transportation and Telco application in climatically demanding environments with wide temperature range from -40 to 75°C. With IP30 industrial case protection, the device provides a high level of immunity against corrosion and electromagnetic interference.  RP-IPJ811-95W also allows either DIN rail or wall mounting for efficient use of cabinet.

    • One port 10/100/1000 Base-T (Data) for connection to the Ethernet Switch
    • One port 10/100/1000 Base-T PoE (Power/Data) for connection to the PoE device (PD)
    • Built-in hardened POE Controller
    • Built-in CPU for true 95W POE detection
    • Deliver ultrahigh power up to 95Watts
    • Support redundant power
    • Reverse polarity protection
    • Overload current protection
    • IP30 Rugged Aluminum housing design
    • Working in extreme environment -40 to +75°C


  • Standards
    • IEEE 802.3 10Base-T Ethernet
    • IEEE 802.3u 100Base-TX Fast Ethernet
    • IEEE 802.3ab 1000Base-T Gigabit Ethernet
    • 1 x RJ-45 10/100/1000BaseT(X) Data
    • 1 x RJ-45 10/100/1000BaseT(X) PSE Output power
    Network Cable
    • UTP/STP above Cat.5e Cable, EIA/TIA-568 10-ohm (100m)
    • CSMA/CD
    LED Indicators
    • PW1 (Green): ON-Power is detected
    • PW2 (Green): ON-Power is detected
    • PoE: ON – 95W PSE is in active mode. ; OFF – PSE is in idle mode.
    POE Pin Assignment
    • Pin 1 (V+), 2 (V+), 3 (V-), 6 (V-)
    • Pin 4 (V+), 5 (V+), 7 (V-), 8 (V-)
    Reverse polarity protection
    • Present
    Overload current protection
    • Present
    Power Consumption
    • 1W@48 VDC full load, Without POE
    Power Supply
    • 2 Redundant power source
    • 48V-56V VDC Power Input
    POE power
    • Maximum POE power 95watts at 56VDC input
    Removable Terminal Block
    • Provide 4 pin terminal block
    • Wire range: 0.34mm^2 to 2.5mm^2
    • Solid wire (AWG):12-24/14-22
    • Stranded wire(AWG): 12-24/14-22
    • Torque:5lb-In/0.5Nm/0.56Nm
    • Wire Strip length: 7-8mm
    • Operating temperature : -40°C~75°C
    • Storage temperature: -40°C ~85°C
    • Operating Humidity: 5% to 95% (Non-Condensing)
    • 103.5 x 32 x 81.5 mm (LxWxD)
    • Rugged Aluminum, IP30 Protection
    • DIN Rail and Wall Mount Design
    • CE, FCC
    • FCC Part 15 Subpart B Class A, CE EN 55022 Class A
    • IEC EN60950-1

  • RP-IPJ811-95W  95W Industrial Gigabit PoE+ Injector, 48-56VDC

Related Products