-
RP-IPE302 is an industrial IP67-level PoE extender, and it is equipped with 1 port 802.3bt PoE++ to 2 ports 802.3bt/at Gigabit. RP-IPE302 can obtain a maximum of 90 watts of PoE power from the input port and provide output port 1 up to 60 watts PoE power and port 2 to 30W.
Three RJ45 ports of RP-IPE302, one is used as PD input, and the other two are used as PSE output, which makes the operation of RP-IPE302 not complicated, simple plug and play. This not only improves efficiency, but also expands the transmission range of PoE to 100 meters.
The IP67 protection grade shell makes RP-IPE302 have better moisture-proof, dust-proof and anti-collision effects, as well as better resistance to cold and heat, which makes RP-IPE302 adapt to more outdoor harsh environments.
-
- Complies with IEEE802.3af/at/bt Standard
- Metal shell, protection level IP67，IK10 vandal proof
- Complete unit does not require power adapter
- One 90W PD Input，Two PSE output
- Data and power carried over the same cable
- Complete unit does not require power adapter
- Support Plug-and-play for the devices without any configuration
- Support 10/100/1000Mbps data transmission
- 10/100/1000Mbps data transmission and PoE power supply distance up to 100M
- Operating temperature: -20°C~60°C
- It's ideal for harsh outdoor environment
-
| Standard |
- IEEE 802.3 Ethernet
- IEEE 802.3u Fast Ethernet
- IEEE 802.3ab Gigabit Ethernet
- IEEE 802.3x Flow Control
- IEEE 802.3af Power over Ethernet
- IEEE 802.3at Power over Ethernet Plus
- IEEE 802.3bt Power over Ethernet Plus Plus
|
| PoE Standard |
- IEEE 802.3af Power over Ethernet
- IEEE 802.3at Power over Ethernet Plus
- IEEE 802.3bt Power over Ethernet Plus Plus
|
| Interface |
- PoE in port:1 x 10/100/1000Mbps RJ45 port
- PoE out port : 2 x 10/100/1000Mbps RJ45 port
|
| Network Media(Cable) |
- 10BASE-T: UTP category 3,4, 5 cable (≤100m)
- 100BASE-TX: UTP category 5,5e cable (≤100m)
- 1000BASE-TX: UTP category5e cable (≤100m)
|
| Power Pin Assignment |
- 1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-)
|
| PoE Power Output |
- Per port 48-55V DC Port1:60W Max Port2:30W Max
|
| Input Power Requirements |
- Ul508, TUV EN60950-1 approved (meeting EN60204-1)
|
| Environment |
- Operating Temperature: -20°C ~ 60 °C
- Storage Temperature: -40 ~ 80 °C
- Operating Humidity: 10% ~ 90% non-condensing
- Storage Humidity: 5% ~ 90% non-condensing
|
| Dimension |
|
-
Datasheet
