RP-IPG210A-2GF


RP-IPG210A-2GF
8-P Gigabit PoE + 2-TP/SFP(100/1G) slot Industrial Managed Switch

Datasheet
Manual
Firmware

  • RP-IPG210A-2GF industrial L2+ managed GbE PoE+ switch is the next generation industrial grade Ethernet switch offering powerful L2 and basic L3 features with better functionality and usability. In addition to the extensive management features, RP-IPG210A-2GF also provides carrier Ethernet features such as OAM/CFM/ERPS/EPS/PTPv2, of which make them suitable for industrial and carrier Ethernet applications.

    RP-IPG210A-2GF delivers 8 (10M/100M/1G) RJ45 with 8 PoE+ (Support 802.3 at/af, and total up to 240W) ports, 2 combo GbE RJ45/SFP ports and RJ45 console port. RP-IPG210A-2GF provides high HW performance and environment flexibility for industrial and carrier Ethernet applications.

    The embedded Device Managed System (DMS) features provides users with the benefits of easy-to-use/configure/install/troubleshoot in the video surveillance, wireless access, and other industrial applications. RP-IPG210A-2GF is ideal to deliver management simplicity, better user experience, and lowest total cost of ownership.

    • Rapid Ring (R-Ring)
    • Built in Device Management System (DMS)
    • iPush APP for real time alarm notification
    • ITU-T G.8031 Ethernet Linear Protection Switching (EPS)
    • ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
    • IEEE 1588v2 PTP
    • IEEE 802.3ah OAM
    • IEEE 802.1ag CFM (ITU-T Y.1731 Performance monitoring)
    • DHCP Server
    • IEEE 802.3az Energy Efficient Ethernet standard for green Ethernet application
    • IEEE 802.3af/at Power over Ethernet
    • IPv4/IPv6 L3 static route
    • EtherNet/IP (by request)

     

  • Standards
    • IEEE 802.3/3u 10Base-T, 100Base-TX Ethernet
    • IEEE 802.3ab 1000Base-T Ethernet
    • IEEE 802.3z 1000Base-X Ethernet
    • IEEE 802.3x Flow Control capability
    • IEEE802.3at/af PoE standard
    • IEEE802.3az Energy Efficient Ethernet
    Interface
    • Port 1 to 8: RJ-45 10/100/1000Mbps with 802.3af/at PoE, auto MDI/X
    • Port 9 to 10: RJ45/SFP(100/1000Mbps) combo
    • RJ-45 Console port
    • Reset button
    • 1DI / 1DO
    Forwarding Capacity
    • 14.88 Mpps
    Switching Capacity
    • 20Gbps
    Jumbo frames
    • 9216Bytes
    MAC Table 
    • 8K MAC addresses
    Ring Management
    ITU-T G.8031
    • Supports ITU-T G.8031 Ethernet Linear Protection Switching
    ITU-T G.8032
    • Supports ITU-T G.8032 Ethernet Ring Protection Switching
    Rapid Ring
    • Enable self-recover time in less than 20ms
    • DIP switch Ring setting
    Ethernet OAM
    IEEE 802.3ah OAM
    • Supports Operations, Administration & Management
    IEEE 802.1ag & ITU-T Y.1731 Flow OAM
    • Supports IEEE 802.1ag Ethernet CFM (Connectivity Fault Management)
    • Supports ITU-T Y.1731 Performance Monitoring
    Layer 2 Switching
    Spanning Tree Protocol (STP)
    • Standard Spanning Tree 802.1d
    • Rapid Spanning Tree (RSTP) 802.1w
    • Multiple Spanning Tree (MSTP) 802.1s
    VLAN
    • Port-based VLAN
    • 802.1Q tag-based VLAN
    • MAC-based VLAN
    • Management VLAN
    • Private VLAN Edge (PVE)
    • Q-in-Q (double tag) VLAN
    • Voice VLAN
    • GARP VLAN Registration Protocol (GVRP)
    Trunking
    • Link Aggregation Control Protocol (LACP) IEEE 802.3ad
    • Up to 5 groups and up to 4 ports per group
    DHCP Relay
    • Relay of DHCP traffic to DHCP server in different VLAN.
    • Works with DHCP Option 82
    IGMP v1/v2/v3 snooping
    • IGMP limits bandwidth-intensive multicast traffic to only the requesters
    • Supports 1024 multicast groups
    IGMP Querier
    • IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
    IGMP Proxy
    • IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router
    MLD v1/v2 snooping
    • Deliver IPv6 multicast packets only to the required receivers
    Multicast VLAN Registration (MVR)
    • It uses a dedicated manually configured VLAN, called the multicast VLAN, to forward multicast traffic over Layer 2 network in conjunction with IGMP snooping
    Layer 3 Switching
    IPv4 Static Routing
    • IPv4 Unicast: Static routing
    IPv6 Static Routing
    • IPv6 Unicast: Static routing
    Security
    Secure Shell (SSH)
    • SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported
    Secure Sockets Layer (SSL)
    • SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch
    IEEE 802.1X
    • IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN, single/multiple host mode and single/multiple sessions
    • Supports IGMP-RADIUS based 802.1X
    • Dynamic VLAN assignment
    Layer 2 Isolation Private VLAN Edge
    • PVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks
    Port Security
    • Locks MAC addresses to ports, and limits the number of learned MAC address
    IP Source Guard
    • Prevents illegal IP address from accessing to specific port in the switch
    RADIUS/ TACACS+
    • Supports RADIUS and TACACS+ authentication. Switch as a client
    Storm Control
    • Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port
    DHCP Snooping
    • A feature acts as a firewall between untrusted hosts and trusted DHCP servers
    ACLs
    • Supports up to 256 entries. Drop or rate limitation based on:
    • Source and destination MAC, VLAN ID or IP address, protocol, port,
    • Differentiated services code point (DSCP) / IP precedence
    • TCP/ UDP source and destination ports
    • 802.1p priority
    • Ethernet type
    • Internet Control Message Protocol (ICMP) packets
    • TCP flag
    Loop Protection
    • To prevent unknown unicast, broadcast and multicast loops in Layer 2 switching configurations.
    Quality of Service
    Hardware Queue
    • Supports 8 hardware queues
    Scheduling
    • Strict priority and weighted round-robin (WRR)
    • Queue assignment based on DSCP and class of service
    Classification
    • Port based
    • 802.1p VLAN priority based
    • IPv4/IPv6 precedence / DSCP based
    • Differentiated Services (DiffServ)
    • Classification and re-marking ACLs
    Rate Limiting
    • Ingress policer
    • Egress shaping and rate control
    • Per port
    Management
    HW Monitoring
    • Temperature Detection and Alarm
    HW Watchdog
    • Supported to resume operation from CPU hang up
    iPush
    • The real time alarm notification could lower technical support cost
    • Works with iOS and Android devices to make quick work of even the most demanding tasks.
    DHCP Server
    • Support DHCP server to assign IP to DHCP clients
    Remote Monitoring (RMON)
    • Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis
    Port Mirroring
    • Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported.
    UPnP
    • The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play
    s-Flow
    • The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats
    IEEE 802.1ab (LLDP)
    • Used by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network
    • Support LLDP-MED extensions
    Web GUI Interface
    • Built-in switch configuration utility for browser-based device configuration
    CLI
    • For users to configure/manage switches in command line modes
    Dual Image
    • Independent primary and secondary images for backup while upgrading
    SNMP
    • SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM)
    Firmware Upgrade
    • Web browser upgrade (HTTP/ HTTPs) and TFTP
    • Upgrade through console port as well
    NTP
    • Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched
    Other Management
    • HTTP/HTTPs; SSH
    • DHCP Client/ DHCPv6 Client
    • Cable Diagnostics
    • Ping
    • Syslog
    • IPv6 Management
    Power over Ethernet (PoE)
    Port Configuration
    • Supports per port PoE configuration function
    PoE Scheduling
    • Supports per port PoE scheduling to turn on/off the PoE devices (PDs)
    Auto-checking
    • Check the link status of PDs. Reboot PDs if there is no responses
    Power Delay
    • The switch provides power to the PDs based on delay time when PoE switch boots up, in order to protect switch from misuse of the PDs
    PoE Power Budget
    • 240 Watts
    Power Supply
    • 54 VDC dual inputs
    • DC Operating Range 48 to 56 VDC
    • Required >48 VDC for PoE 802.3af (Max. 15.4W) output
    • Required >54 VDC for PoE+ 802.3at (Max. 30W) output
    Environment
    • Operating temperature: -40°C to 75°C
    • Storage Temperature: -40 to 85°C
    • Operating Humidity: 5% to 95% (Non-Condensing)
    Dimension
    • 62x 135x 130mm (WxHxD)
    EMS
    • EN61000-4-2 ESD, EN61000-4-3 RS, EN61000-4-4 EFT, EN61000-4-5 (for RJ45 Port, Surge 6KV), EN61000-4-6 CS, EN61000-4-8 PFMF, (EN61000-6-2 by request)
    EMI
    • FCC Part 15 Class A
      (EN61000-3-2, EN61000-3-3, EN61000-6-4, EN55022, EN55011 by request)
    Safety
    • CE, (EN60950 by request)
    Stability Testing
    • EN 60068-2-6 (Vibration), EN 60068-2-27(Shock), EN 60068-2-32(Free Fall)

  • RP-IPG210-2GF 8-P Gigabit + 2-TP/SFP(100/1G) slot Industrial Managed PoE Switch

Related Products