Ethernet over VDSL2 Converter, w/ 802.3af PoE

  • RP-VC102EP, a VDSL2 (Very high-bit-rate Digital Subscriber Line) PSE LAN Extender, provides a broadband transmission up to 100/60Mbps of downstream/upstream data rate over single pair copper line for point-to-point Ethernet connectivity.  With 100/60Mbps data rate, RP-VC102EP supports transmission distance up to 300 meters, and 30/10 Mbps for 1km long range connection.  Users may also select a fixed data rate or a fixed SNR margin for different copper line ranging. With Power Sourcing Equipment, RP-VC102EP provides power supply over Ethernet cable to the 802.3af compliant power device.

    With plug and play features and minimum installation time, each RP-VC102EP can be configured into either CO for central side or RT for remote side by dip switch setting. RP-VC102EP conforms to the ITU-T G.993.1 and G.993.2 to meet VDSL/VDSL2 and SG15Q4 DMT for network requirements. A pair of RP-VC102E and RP-VC102EP offers a cost effective solution for bandwidth-hungry applications such as LAN-to-LAN connectivity, Video Streaming, FTTB, and MDU/MTU over single twisted pair telephone line.

    • ITU-T G.993.1, G.993.2 VDSL/VDSL2 and SG15Q4 DMT Compliance
    • 100/60Mbps DownSream/UpStream for distance up to 300 meters
    • Trellis Coding support up to 1024 Discrete Multi-Tone (DMT) bin
    • Supports DSL connection up to 2000 meter
    • Selectable Fast and Interleaved modes
    • Selectable fixed data rate and fixed SNR margin
    • Auto MDIX for 10/100 Base-T Ethernet LAN Ports
    • IEEE 802.3af PSE Compliant for Class 0-3.
    • 4 Dip Switches for Master/Slave Configurations
    • Low-Latency for Video/Voice/Data applications

  • Standard
    • IEEE802.3/IEEE802.3u standard
    • Ethernet over VDSL2
    • ITU-T G.993.1/2, SG15Q4 DMT Compliance
    • IEEE802.3af Power over Ethernet
    • 1 RJ-45 10/100Mbps Ethernet port
    • 1 RJ-11 Connector for EoVDSL2
    • 4 DIP switch for mode selection
    • RJ-45 (Ethernet): Category 3, 4, 5 UTP/STP
    • RJ-11 (EoVDSL2): Twisted-Pair phone wire
    VDSL Transmission
    • ITU-T G.993.1/2, SG15Q4 DMT Compliance
    • Trellis Code with 1024 DMT bins
    • Max Data Rate: 100/60 Mbps
    LAN Features
    • Auto-Detection for 10/100 Base-T and Half/Full duplex
    • High performance bridge for Ethernet extension
    • Fully compatible with IEEE802.3/IEEE802.3u
    • Auto MDIX Function
    PoE/PSE features
    • IEEE 802.3af Compliant with output voltage within 44~57Volt
    • Safety-Extra-Low-Voltage (SELV) Compliant
    • Maximum 15.4W Power Levels for Class 0-3
    • Power Auto Restart with Under Voltage Lockout (UVLO) Fault Detection
    Data Rate & Distance
    • Performance in AWG 26 Line at 6dB without rate limit
    Down Stream

    Data Rate (Mbps)

    Up Stream

    Data Rate (Mbps)



    100 60 500
    98 53 1000
    90 44 1250
    80 36 1500
    70 27 1750
    60 18 2000
    48 11 2500
    39 8 3000
    35 3.5 3500
    28 0.3 4000
    LED indicators
    • POWER: Power is ON
    • DSL: VDSL Loop Connection Status
    • LAN: Data Activity of LAN Port
    • PSE: Power Source is ON
    Power Supply
    • External Power Adapter DC12V/2A
    • Operating Temperature: 0°C~ 50°C
    • Operating Humidity: 5%~95% (Non-Condensing)
    • 120 * 90 * 28 mm
    • CE, FCC

  • RP-VC102EP Ethernet over VDSL2 Converter, w/ 802.3af PoE

Related Products