RP-VC102EMP


RP-VC102EMP
Ethernet over VDSL2 Converter, w/ 802.3at PoE

Datasheet
Manual

  • RP-VC102EMP is a VDSL2 LAN Extender providing a broadband transmission up to 100/100Mbps for downstream/upstream over single pair copper line for point-to-point Ethernet connectivity.. With 100/100Mbps data rate, RP-VC102EMP supports transmission distance up to 300 meters and less data rate for 2km long range connection.  Users may also select a fixed data rate or a fixed SNR margin for different copper line ranging.

    With plug and play features and minimum installation time, a pair of RP-VC102EMP is indeed a cost-effective solution for bandwidth-hungry applications. such as video streaming, or FTTB over single twisted pair telephone wires or coaxial cables.

    In some of the working environments, RP-VC102EMP is capable of power up the device regardless it is embedded with PoE or not which can be used with PoE splitter. Enable RP-VC102EMP to work with local power facilities, and perform PoE over 100 meter LAN line perfectly

    • Compliant with ITU-T G.993.1, G.993.2 VDSL2 Standard
    • Compliant with IEEE 802.3af/at and mid-span PoE PD (powered device)
    • VDSL2 Profiles: 8a/b/c/d, 12a/b, 17a, 30a
    • Supports Back-to-back applications
    • Ethernet packets over VDSL2
    • 100/100Mbps Downstream / Upstream for distance up to 300 meters
    • Trellis Coding support up to 1024 Discrete Multi-Tone (DMT) bin
    • Supports DSL connection up to 2000 meters
    • Auto MDIX for 10/100BaseT Ethernet LAN Ports
    • 4 Dip Switches for Master/Slave Configurations
    • Low-Latency for Video/Voice/Data applications

     

  • Standard
    • IEEE802.3/IEEE802.3u standard
    • Ethernet over VDSL2
    • ITU-T G.993.1/2, SG15Q4 DMT Compliance
    • IEEE802.3 at/af Power over Ethernet
    Interface
    • 1 RJ-45 10/100Mbps 802.3at/af PoE PSE port
    • 1 RJ-45 10/100Mbps Ethernet port
    • 1 RJ-11 Connector for EoVDSL2
    • 4 DIP switch for mode selection
    Cable
    • RJ-45 (Ethernet): Category 3, 4, 5 UTP/STP
    • RJ-11 (EoVDSL2): Twisted-Pair phone wire
    VDSL Transmission
    • ITU-T G.993.1/2, SG15Q4 DMT Compliance
    • Trellis Code with 1024 DMT bins
    • Max Data Rate: 100/100 Mbps
    LAN Features
    • Auto-Detection for 10/100 Base-T and Half/Full duplex
    • High performance bridge for Ethernet extension
    • Fully compatible with IEEE802.3/IEEE802.3u
    • Auto MDIX Function
    PoE/PSE features
    • LAN1 embeds 802.3at/af, mid-span PoE PSE for up to 30w output
    • IEEE 802.3at/af Compliant with output voltage within 48DVC
    • Safety-Extra-Low-Voltage (SELV) Compliant
    • Maximum 30W PoE output
    • Power Auto Restart with Under Voltage Lockout (UVLO) Fault Detection
    Data Rate & Distance
    • Performance in AWG 26 Line at 6dB without rate limit
    Down Stream

    Data Rate (Mbps)

    Up Stream

    Data Rate (Mbps)

    Distance

    (feet)

    100 100 1000
    100 60 1200
    90 44 1350
    80 36 1500
    70 27 1750
    60 18 2000
    48 11 2500
    39 8 3000
    35 3.5 3500
    28 0.3 4000
    LED indicators
    • POWER: Power is ON
    • DSL: VDSL Loop Connection Status
    • LAN1 / LAN2:  Data Activity of LAN Port
    • M/S:        Master/Slave Selection
    Power Supply
    • External Power Adapter 48V/0.75A
    Environment
    • Operating Temperature: 0°C~ 40°C
    • Operating Humidity: 5%~95% (Non-Condensing)
    Dimension
    • 120 * 90 * 28 mm
    Certifications
    • CE, FCC

  • RP-VC102EMP Ethernet over VDSL2 Converter, w/ 802.3at PoE

Related Products