RP-VC102CP


RP-VC102CP
Coaxial over VDSL2 Converter, w/ 802.3af PoE

  • RP-VC102CP, a VDSL2 (Very high-bit-rate Digital Subscriber Line) Cable Extender, provides a broadband transmission up to 100/60Mbps of downstream/upstream data rate over single pair coaxial cable for point-to-point Ethernet connectivity together with PoE PSE output.  With 100/60Mbps data rate, RP-VC102CP supports transmission distance up to 400 meters, and 63/27 Mbps for 1.3km long range connection. Users may also select a fixed data rate or a fixed SNR margin for different coaxial cable ranging.

    With plug and play features and minimum installation time, each RP-VC102CP can be configured into either CO for central side or RT for remote side by dip switch setting. The RP-VC102CP conforms to the ITU-T G.993.1 and G.993.2 to meet VDSL/VDSL2 and SG15Q4 DMT for network requirements. A pair of RP-VC102C/ RP-VC102CP offers a cost effective solution for bandwidth-hungry applications such as Cable LAN-to-LAN connectivity, Video Streaming, FTTB, and MDU/MTU over single pair coaxial cable with PoE PSE output.

    • ITU-T G.993.1, G.993.2 VDSL/VDSL2 and SG15Q4 DMT Compliance
    • 100/60Mbps DownSream/UpStream for distance up to 300 meters
    • Trellis Coding support up to 1024 Discrete Multi-Tone (DMT) bin
    • Supports DSL connection up to 2000 meter
    • Selectable Fast and Interleaved modes
    • Selectable fixed data rate and fixed SNR margin
    • Auto MDIX for 10/100 Base-T Ethernet LAN Ports
    • IEEE 802.3af PSE Compliant for Class 0-3.
    • 4 Dip Switches for Master/Slave Configurations
    • Low-Latency for Video/Voice/Data applications

  • Standard
    • IEEE802.3/IEEE802.3u standard
    • Ethernet over VDSL2
    • ITU-T G.993.1/2, SG15Q4 DMT Compliance
    • IEEE802.3af Power over Ethernet
    Interface
    • 1 RJ-45 10/100Mbps Ethernet port
    • 1 BNC Connector for DSL
    • 4 DIP switch for mode selection
    Cable
    • RJ-45 (Ethernet): Category 3, 4, 5 UTP/STP
    • BNC (DSL): Coaxial cable
    VDSL Transmission
    • ITU-T G.993.1/2, SG15Q4 DMT Compliance
    • Trellis Code with 1024 DMT bins
    • Max Data Rate: 100/60 Mbps
    LAN Features
    • Auto-Detection for 10/100 Base-T and Half/Full duplex
    • High performance bridge for Ethernet extension
    • Fully compatible with IEEE802.3/IEEE802.3u
    • Auto MDIX Function
    PoE/PSE features
    • IEEE 802.3af Compliant with output voltage within 44~57Volt
    • Safety-Extra-Low-Voltage (SELV) Compliant
    • Maximum 15.4W Power Levels for Class 0-3
    • Power Auto Restart with Under Voltage Lockout (UVLO) Fault Detection
    Data Rate & Distance
    • Performance in 5C2V Cable at 6dB without rate limit
    Down Stream

    Data Rate (Mbps)

    Up Stream

    Data Rate (Mbps)

    Distance

    (feet)

    100 60 500
    100 58 1000
    100 56 1250
    98 53 1500
    96 50 1750
    88 48 2000
    80 44 2500
    75 35 3000
    70 30 3500
    63 25 4000
    LED indicators
    • POWER: Power is ON
    • BNC: Cable Loop Connection Status
    • LAN: Data Activity of LAN Port
    • PSE: Power Source is ON
    Power Supply
    • External Power Adapter DC5V/1A
    Environment
    • Operating Temperature: 0°C~ 50°C
    • Operating Humidity: 5%~95% (Non-Condensing)
    Dimension
    • 120 * 90 * 28 mm
    Certifications
    • CE, FCC

  • RP-VC102CP Coaxial over VDSL2 Converter, w/ 802.3af PoE

Related Products